The tread and sidewalls should have no abrasions, bulges or cuts.The drive shaft should not be twisted and the u-joints should be free of any debris.Door seals should not be worn, torn or rotten. Physically demonstrate that the doors open, close and latch properly.The cat walk and steps should be clear of any loose objects.There should be at least ¼ of an inch of friction material. There should be no oil or debris on the brake lining.Check the brake hose at both ends to make sure it is not leaking air.Make sure the brake drum is secured properly.Make sure to mention the brake chamber is not leaking air.The axle seal should not be leaking and should be filled to the manufacturer’s specifications.The actual airbag is rubber, so it is important to check for abrasions, bulges, cuts and leaks, in addition to any missing mounting bolts.Make sure the tie rod is properly mounted and secure, not cracked, bent or broken.īack to top of Engine Compartment Driver Door Fuel AreaĪgain it is important to make sure these items are properly mounted and secure.Tires must be properly filled to the manufacturer’s specifications. Tread depth should have a depth no less than 4/32 of an inch. Look for abrasions, bulges or cuts on the tread or sidewalls.It should not be cracked, bent or broken. Make sure the steering column is properly mounted and secure.The spring hanger should be properly mounted and secure.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |